Blog

Total Water Heater Maintenance Tips

Posted by on Jun 12, 2015 in Gas Water Heater Repair Fort Lauderdale, Water Heater Repair Fort Lauderdale, Water Heater Use and Care | 0 comments

Water Heater Repair Fort Lauderdale is not about to discuss the miserable experiences concerning water heater maintenance of “getting out of bed to the freezing bath,” here. Likewise, we are going to presume that one recognizes the basic concept of ensuring that ones water heater is maintained routinely in an effort to receive the most from its expected life. This can certainly help one reduce costs on energy costs as well. All of that is wise we realize. Though hot water heaters do not require a lot concerning maintenance (and we are amazed, even though not shocked, by how many customers we come across who have not carried out anything to their water heater), listed below are the duties people must understand in relation to routine maintenance.

How Long Should My Fort Lauderdale Water Heater Last?

The regular gas water heater can last 8 to 10 years. There are a number things that can have an impact on the general lifetime needless to say, however this is an effective standard. Perhaps the most significant factor which will impact the long life of it is normally mineral deposits. A lot of of the duties in this article should go a long way in assisting to lower the accumulation of mineral deposits on the inside the storage tank of the water heater.

Fort Lauderdale Water Heater Repair PreventionHot Water Heater Repair Fort Lauderdale

Property owners, even people which really do not feel very handy, can achieve a great deal of water heater preservation by themselves. Even though much of the time, water heaters are safe and sound, it is necessary to remember that they actually operate from electric power and/or gas, thus suitable safety guidelines should be observed. Be sure to apply these techniques as an informative tutorial, for we’d much rather demonstrate all these together with you directly. The electric power to the water heater requires to be switched off ahead of engaging in any servicing. Ones breaker box ought to have a preferably labeled switch to point out which breaker is the heater’s. With a gas heater, turn the gas cutoff counterclockwise to switch off the gas to the device.

The component of the heater that aids with controlling rusting inside of the water storage tank are the anode rods, or additionally labeled sacrificial anode rods. Many are constructed from aluminum or magnesium around a steel wire. In time the external covering of the rods will erode and they need to be replaced when the steel wire is seen. They ordinarily last around 5 years, though that is reduced if ones water is soft. Over the long haul, it is better and less costly to have the anode rods changed, so that one can acquire an extended life from the water heater storage tank. The rods ought to be inspected every year basis.

The follow video does a very good job of showing the method needed with replacing the anode rods:

Not every water heater has dip tubes. They must be checked out for deterioration every 6 months. To test it, take it out and check its length to the height of the water heater. It ought to be about 6″ to 8″ shorter in comparison with the tank. Whenever it’s smaller than that, or simply demonstrates symptoms of breakage or falling apart, it’ll need to get changed.

The big and small flush. Once again, mineral deposits are the biggest reason of water heater malfunctions. Based on the level of quality of water in ones residence will establish just how rapidly sediment will build up inside of the storage tank. This sediment can solidify with time, inducing weird popping sounds from the storage tank, lower the effectiveness of the device, and perhaps clog up the drain valve. Ideally, every 6 months, but at the least every year, empty 1 or 2 gallons of water from the drain valve in the bottom of the hot water heater in a pail or by a hose in a container outdoors. Look to observe the amount of sediment is within the pail when the water settles. If it appears to be pretty clear, that great! When these types of small flushes are executed two times yearly, one may well not need to do a big flush as frequently. If the water appears very dirty, a full flush really should be completed. It is likewise a fantastic occasion to assure the bottom drain valve of the storage tank is operating properly and not leaking. They are commonly composed of plastic and as time passes when they aren’t opened up, they may get stuck or not close up firmly, so opening and closing them in the course of the small flush test is very good.

There can be unique measures one may take through flushing to address any sort of water smells that might develop when hot water comes from faucets within the house also.

This video indicates exactly how and reasons behind a water heater flush:

Regarding holiday or temporary properties, one ought to empty the storage tank of all its water in order to avoid any kind of flooding when the residence is not being occupied. Needless to say, be sure to fill it up whenever the household is to be resided in once again.

Water pipe inspection. Analyze to assure all water piping don’t have leaks or are impaired at all. It ought to be straightforward to see when there are any leaks coming from any piece of the water plumbing or storage tank for it will have water below and/or close to the device. Leaking water can lead to water damage to elements of ones residence, so make sure that all seems dry, primarily if the heater is placed within the house and not in a garage.Fort Lauderdale Water Heater Repair

T&P valve check. The T&P valve, otherwise known as the temperature and pressure relief valve, should really be looked at annually. The function of the T&P valve would be to defend the water heater storage tank from excessive pressure, and exploding, not to frighten anybody. The owners guide must be looked over to be certain the suitable ways are used but listed below are the general actions. A little water can come out of the valve and it’s going to be really hot so take care. Lift up the handle and let go of it. Have a container available to catch any unwanted water which can come out. Additionally, the noise of pressure getting discharged will be observed. The handle will need to snap back in position. In the event that it won’t give it a try once more. If perhaps it will not go back again into position following several attempts, it is going to have to be changed. The valve could possibly drip a little water after doing that for a little while. If it doesn’t quit dripping after a couple of hours inform us.

There does exist a great deal of discussion around what the most effective temperature setting ought to be. The manufacturer pre-programmed setting is often 140 degrees, which is actually warmer than the majority of people may ever have to have. 120 degrees is the ordinary temperature and a number of people actually go as far as 100 degrees. We are publishing much more on this subject matter shortly, but we would suggest not going over 120 degrees.

Just For Gas Water HeatersWater Heater Repair Fort Lauderdale

The gas venting system requires being looked over each 3 months. Look at to make certain all fittings are tight and for obstructions and deterioration to the vent pipes together with being confident that these are totally free of rust and deterioration .. Gas fired hot water heaters vent fumes to the outdoors of the household. If these fumes flow in the property it might be unsafe and a fire threat. Make sure that everything combustible or corrosive is faraway from the exhaust ventilation to help alleviate problems with fires. Change all loose, broken or corroded areas of vent pipes.

Take a look at the pilot light to complete a visual diagnosis of just how it is working. The pilot light is the element that ignites the gas burner that will heat the water. A clean burning and correctly adjusted pilot light is necessary for your water heater to function at peak efficiency. The color of the flame of the pilot light needs to be blue with natural gas heaters or blue/green with just a bit of yellow at the tip with propane heaters. A weakened flame, a yellow flame, or a flame which has a divided flame on the top suggests that a modification is required.

Just For Electric Water Heaters

Applying insulation wraps or covers around the storage tank can certainly help hold a regular temperature inside of the storage tank without the need for as much power. As well, with the heater not needing to operate as much will increase the life span of the heating element seeing that it will not be utilised as much. Every 3 months roughly, check out to ensure the insulation cover is attached effectively and hasn’t fallen or shifted on the water storage tank.

Routine evaluation of the heating element is extremely important and definitely will help lessen the need for an unexpected emergency repair. We aren’t going to get into the specifics for a complete assessment right here, however one will require a voltage/OHM meter to be sure there exists a closed electricial circuit. Heating elements will need changing from time to time.

Continue to keep the vicinity close to ones water heater thoroughly clean of dirt. Primarily if the water heater is placed in the garage area, be certain to keep the place swept. The cleaner the heater is, the considerably better it is going to run without having the requirement of a water heater repair.

Replace Old Water Heaters With Energy Efficient Ones

Today, almost all water heaters made have a relatively good quantity of energy efficiency. In April of 2015, new rules were set up in the United States on water heaters. Needless to say, the better the heater, the longer the life one will receive from the device using the suitable routine maintenance through the years. Don’t wait to phone Hot Water Heater Repair Fort Lauderdale to talk about water heater maintenance or possibly to help answer any concerns on picking out the most suitable replacement water heater for ones house or workplace. Brand, model, and size really need to all be considered through the selection process and not merely utilize the “bigger the better” slogan. With regard to storage tank water heaters, one doesn’t desire to be continuously retaining a surplus quantity of hot water that won’t be used.

Reasons for Water Heater Leaks

Posted by on Jun 4, 2015 in Gas Water Heater Repair Fort Lauderdale, Water Heater Repair Fort Lauderdale, Water Heater Replacement Fort Lauderdale | 0 comments

Because of the quantity of hot water the ordinary homeowner makes use of every day, should there be a trouble in the plumbing system in having hot water, it can definitely trigger an interruption in one’s day-to-day living. Without having a hot bath, operating the dishwasher or cleaning white garments in the washing unit can have an adverse effect, Water Heater Repair Fort Lauderdale understands.

Reasons for Fort Lauderdale Water Heater LeakagesWater Heater Leak Fort Lauderdale FL

As quickly as one feels there could be an issue with the amount or quality of hot water one must get the plumbing system examined. Should there be a hot water leakage it will swiftly cause an increase in energy expenses and any water leakage can perhaps harm the household.

Corrosion is the major reason for a water heater leak. More recent water heaters are nicely developed and can last considerably longer as compared to anything it is changing, however they can produce deterioration also. If there are any indicators of rust on the outside of the water heater tank this is a preliminary indicator that there is a trouble starting. Nonetheless, the pipes that the water goes through can likewise wear away relying on the product of which they are built. Rusty pipes are far more tough to identify than rust on the water heater tank. It is essential to call a plumbing technician at the first website of any rust or deterioration.

If the water heater is improperly installed it can likewise trigger leakages too. Many house owners feel positive in setting up a water heater on their own, however it is usually better to have Hot Water Heater Repair Fort Lauderdale do the installation.
If you have any concerns or issues about the quality of your hot water do not think twice to offer us a call.

Solar Water Heating Options

Posted by on May 5, 2015 in Solar Water Heaters Fort Lauderdale, Water Heater Replacement Fort Lauderdale | 0 comments

Lots of individuals look at the field of alternative energy and the notion of going earth-friendly as a trend, and one that is certainly not any longer fashionable. Though that could be the fact for some individuals, the importance for not only us in the United States to be far more energy sensitive, but as a global society, is a must. This post is not designed to be a complaint of many people not becoming energy informed enough, rather a chance to have a look at the solar energy possibilities for water heating.

Solar water heating is a workable alternate choice for a lot of people, and is getting much more of a choice regardless of the area of the United States one resides in as technology continues to grow. A fine example of this of this position is to observe Germany. When it comes to climate and the supply of solar energy, Germany is comparable to Alaska. However, Germany is an innovator in solar energy research, advancement and use. As a country, Germany made the choice to achieve this, and it is performing good for them. Having said that, the capability for property owners in any portion of the U.S. to take advantage of employing solar energy, and not only for water heating, is an alternative.Solar Water Heaters Fort Lauderdale

While technologies advances and much more readily accessible in the U.S., the equipment expenses for using solar water heating will proceed to decrease, which in turn will help make it a less expensive choice for the ordinary property owner. Considering the April, 2015 brand new water heater specifications in the United States, the price of a large number of new water heaters has grown. But, the brand new water heaters made are going to be even more energy efficient, that is certainly a positive.

According to SEIA, more than 9 million U.S. household water heaters are changed annually. That is great information to generating a more sustainable world. A good number of home solar water heating systems may be set up in a day.

The 2 forms of solar water heating systems are active systems and passive systems. Active systems have an electric pump to circulate the water. These are the most typical in the U.S. for both residential and commercial use. Passive systems implement thermodynamics to move the water. One can find several versions of the 2 main types of systems that we will not focus on in this article, although the U.S. Department of Energy has great info about them here.

Solar water heaters are constructed of 3 primary components: the solar collector, insulated piping, and a hot water storage tank. Electronic controls might also be included, plus a freeze protection system for cooler areas. Solar radiation arrives at the solar collector, the solar collector absorbs the heat and transfers it to potable water in the system. Flowing out of the collector into a hot water tank, the heated water is accessible and put to use on demand. Either system may offer up to 80 percent of the required hot water requirement of a household or building. A regular property may lessen its CO2 impact by an average of 28 percent then as well.

Sizing a Fort Lauderdale Solar Water Heater System

Residential solar water heater systems are commonly sized very much the same to that of a standard water heater, by the quantity of hot water traditionally utilized. A property that is going to utilize 50 gallons of hot water daily can utilize a 2 solar panel system. Water heater installment businesses such as Water Heater Repair Fort Lauderdale have unique methods we work with to help identify the solar panel sizing for the quantity of hot water necessary each day, per location.

Parts of a Solar Water Heating System

Solar water heating systems comprise a solar collector, insulated piping, heat transfer fluid, a hot water storage tank, and a system controller. Solar water heating systems operate as follows:

The solar collectors absorb sunlight, causing the fluid inside to heat up.
A controller senses that the collector fluid is hotter than the storage tank and signals a pump to turn on.
The pump circulates heat transfer fluid which carries heat from the collector to the storage tank.
The storage tank holds the heated water which is used as necessary. Auxiliary heating remains connected to the storage tank for back-up heating when needed.
http://www.seia.org/research-resources/solar-heating-cooling-energy-secure-future

According to the Union of Concerned Scientists, solar water heating systems cost $2,000 – $5,000 to be set up. One can find many state governments and local utilities incentives out there also. They have links on their website here with information about incentives. With usual maintenance and inspection, a solar water heater system may last 20 to 30 years with nominal maintenance and costs.

Eliminating Water Heater Odors

Posted by on Mar 11, 2015 in Water Heater Repair Fort Lauderdale | 0 comments

Are you experiencing problems with foul-smelling odors originating from the water originating from your water heater? It happens from time to time for a few various reasons. Here is what Water Heater Repair Fort Lauderdale suggests to do for getting your water smelling and tasting much better fast.

Reasons for Fort Lauderdale Water Heater Smells?

According to Soquel Creek Water District, “The smell is the result of four factors that must all be present for the odor to develop. These factors include:

  • A high concentration of sulfate in the raw water
  • Sulfate reducing bacteria, non-toxic to humans (sulfate is reduced to a sulfide state by the bacteria)
  • Little or no dissolved oxygen in the water
  • Hydrogen (a component of water which may be present due to water conditions reacting with the anode)”  Read more: http://www.soquelcreekwater.org/content/how-get-rid-odor-water

The most typical source of hot water smell is germs getting into the water supply. This is more widespread in houses that utilize well water and cities that utilize wells as their water supply.

With a water heater temperature level setting of 140 degrees or more will assist in reducing the development of germs within the water storage tank.

Exactly How to Eliminate Stinky Water Odors

The following instructions discuss the best way to use chlorine bleach to wash a water heater.

The electric or gas leading to the water heater tank has to first be turned off.

Next, the cold water supply off that goes to the tank needs to be turned off.

Open the hot water faucet of the kitchen area sink to enable air to get in the tank.

With a a yard hose connected to the storage tank drain valve, drain the water inside the water heater.

Then shut the drain valve after it is empty.

The next step is putting in the bleach.
If the hose for the cold water going in the storage tank is a flexible line, unscrew it from the tank. Otherwise, one will likely need to take off the pressure relief valve, which is more involved. For electric water heaters, one of the elements can be removed.

Utilize a funnel to put bleach within the tank.
Use 5 ounces of bleach for each gallon of the tank capability.
Case in point – A 50 gallon water heater will require 250 ounces of bleach, that is around 2 gallons.

Re attached the water line or pressure relief valve.

Fill the tank back up with water once again.

Shut the hot water faucet of the kitchen area faucet as quickly as all the air runs out the line.

Operate all the hot water appliances till the odor of bleach is noticeable. We want to eliminate the germs that are located in the water lines likewise, not only within the water heater.

Let the water to remain in the tank and water lines undisturbed for 2 to 3 hours.

Empty the storage tank once again and refill it. This time let it set undisturbed for thirty minutes and drain it one more time.

Fill the tank back up. Open all the hot water appliances and let them run till the odor of bleach is gone.

For gas water heaters, relight the water heater pilot burner. For electric water heaters, turn the electricity on once again.

Additionally, by replacing the anode rods, or perhaps the type employed can work as the next video shows:

More Resources

Controlling Odors in Hot Water Heaters – City of Fellsmere

Solving rotten-egg odor in water heaters

Your Household Water Quality: Odors in Your Water

Repairing a Noisy Fort Lauderdale Water Heater

Posted by on Feb 26, 2015 in Water Heater Repair Fort Lauderdale | 0 comments

Water Heater Repair Fort Lauderdale is frequently being contacted to have a look at a loud water heater. Popping and knocking noises might be resulting from a problem with the water heater, but it’s additionally an inconvenience. We are going to explore the most probable reason your water heater may begin producing noise and what you can possibly do to calm it down! Prior to contacting a Fort Lauderdale expert, check out one of the most frequent water heater difficulties and remedies.

The most possible reason a water heater will make noise

Again, if the sound is an clue of problems with the heater that trouble is probably sediment build up. The sediment stems from the water in the storage tank. It is generally comprised of calcium and magnesium debris and is particularly a difficulty in houses which have hard water.

Whenever the sediment starts to develop at the bottom of the storage tank, it traps a little part of hot water beneath it. This will cause the hot water to boil as the tank works. The sounds noticed are the bubbles popping through the sediment.

Moreover, the sediment itself could be the source of the sounds. The sediment sits at the bottom of the tank and can get burnt up creating unusual sounds. And on occasion, the sediment can get carried up to the top of the tank and breaks off creating sounds as it falls back down, striking the sides on its way.

How to avoid a water heater from producing noise

If sediment build-up is what’s creating the sounds, the heater should be reviewed. Hot Water Heater Repair Fort Lauderdale can accomplish this and provide the tank a flush or recommend an additional option.

You can also reduce the chances of sediment build-up by having expert servicing conducted on the storage tank a minimum of annually. This procedure involves flushing the tank of any sediment.

Yet another good possibility is to set up a water softener in your Fort Lauderdale house. Water softeners get rid of minerals from the water prior to it entering the water heater, noticeably decreasing sediment build up.

To learn more about other likely concerns and options offer Water Heater Repair Fort Lauderdale a phone call!

Fort Lauderdale Plumbing Repair

Posted by on Feb 17, 2015 in Drain Cleaning Fort Lauderdale, Plumbing Repair Fort Lauderdale | 0 comments

Doing plumbing upkeep is one means to conserve on your water expense. As a fact, it can assist you stay clear of significant residence problems which can be rather pricey in the years to come. From routine drain cleaning to changing the water heater, there are many means to make certain that your plumbing system is in excellent working condition. In case the trouble is past your skills, you can always give Water Heater Repair Fort Lauderdale a call.

Correct Plumbing Care and Maintenance

To be able to save water, you need to make sure that the plumbing system is constantly in excellent working condition. Overruning commodes and leaking pipes can in fact cost hundreds of dollars. Likewise, you really need to inspect for concealed leaks to ensure that you are not losing cash on the water expense. Attempt to have a look at the water meter and notice if there are uncommon modifications that can be a visible sign of unidentified leakages.

Fort Lauderdale Plumbing Repairs

Doing small repairs is likewise really essential in making sure that the plumbing system is functioning successfully. In case of troubles, ensure you do not put off the repair work for this could cost a bunch of cash specifically when the scenario gets even worse. Even with leakages, definitely be timely. To be able to not lose water, ensure to attend to right away any water damages found. Together with plumbing repairs you might likewise wish to secure your pipeline throughout winter. According to specialists, insulated pipes are less likely to come apart. This will in some way avoid from taking care of pricey leaking repair works.

Various Other Fort Lauderdale Plumbing Maintenance Tips

One means to assist in controlling water damages due to leakages is to examine pipes in the springtime and winter months. If possible, contact us to check the plumbing system for any possible outflow. Always bear in mind that regular upkeep is one means to save water. Routine safety evaluation does not just assist in conserving water, but it can likewise be a help in decreasing the month-to-month expenses.

If you think plumbing upkeep is a bit complex, you are completely mistaken. Prior to you even work with somebody who can care for the repair work for you, you ought to understand that basic plumbing jobs can be done without expert aid. Cleaning drains is one of the upkeep jobs house owners can quickly do by independently. So initiate the practice of staying conscious of the condition of your plumbing system at home – it will pay off in the future!

The Factors of a Water Heater Tank Explosion

Posted by on Jan 22, 2015 in Gas Water Heater Repair Fort Lauderdale, Water Heater Repair Fort Lauderdale, Water Heater Safety | 0 comments

In terms of needing to undertake upkeep on ones water heater, it is a reasonably minimal maintenance device.  Even so, one critical component of it really should be examined routinely.  Water Heater Repair Fort Lauderdale wishes to pass on this safety material concerning ones water heater today.

High temperature if put together with tank deterioration inside of the storage tank may cause an explosion. If the water temperature is under 212 degrees Fahrenheit, one shall be protected from an explosion, though there is a associated risk of scalding at that temperature.  However, if the water temperature is greater than 212 degrees, water becomes into steam, which will enlarge to 1,700 times the space it takes up as water. This is the time an explosion can also occur.Hot Water Heater Repair Fort Lauderdale

Cautionary Indications of a Water Heater Explosion

The leading sign is if one goes to get hot water from a faucet and only steam comes out.  Promptly shut off electric power if one possesses an electric water heater.  If one possesses a gas hot water heater, shut off the gas valve on the water heater.  And then, give us a call to come pinpoint the predicament.

Minimizing Potential Water Heater Dangers

The most critical routine maintenance activity having a water heater is to examine the pressure relief valve, referred to as the T&P valve, on a usual schedule.   This valve helps control the pressure accumulation inside of the water storage tank to reduce a unsafe increase in temperature and overpressure.

Caution!
Remember, the water release out of a T&P valve may be quite hot. If you do not feel safe evaluating the valve contact us.  In addition, undertaking any kind of fixes to the valve really should be performed by a experienced plumbing repair provider.

How to Test the T&P Valve

Clear the place near the overflow pipe and floor drain.
Lift up the test handle for around 5 seconds or until the water runs clean.
Let go of the handle.
If the T&P valve keeps on running with water, raise the handle up and down rapidly to have it reseat itself.  One may need to do this a several times.  IF it has not been tested for a while, it might be difficult to raise it at first.  Avoid using excessive force, although could need to make use of just a little.
If the T&P valve continues to have water coming out, it needs to be changed.

Additional points to watch out for are rust on the stem of the valve.  If there is any water seeping out of the valve stem or out of the drain valve.

Seeking far more hints?  Have a look at Water Heater Repair Fort Lauderdale’s additional articles right here:

Preventative Water Heater Maintenance in 10 Minutes

Fort Lauderdale Water Heater Safety Precautions

From around the Web:

The Aquanta smart water-heater controller promises to slash your energy bill

Home maintenance checklist: Fall

Leaking Fort Lauderdale Water Heater Pressure Relief Valve

Posted by on Dec 9, 2014 in Gas Water Heater Repair Fort Lauderdale, Water Heater Repair Fort Lauderdale | 0 comments

The pressure relief valve of a water heater has a vital task – seeing to it the water heater tank does not blow up. So with that in mind, Water Heater Repair Fort Lauderdale wishes to ensure property owners know how to best look after it. They will leak when the valve wears out or when the water storage tank pressure gets higher then the relief point.Hot Water Heater Repair Fort Lauderdale

We advise that a minimum of two times a year, property owners test to ensure the pressure relief valve, or T&P valve as we will call it, is working correctly. All one needs to do is raise the manage for a few seconds and let go of it. It ought to snap back to its initial position. When it is raised, one may hear the sound of pressure being released from it, much like the sound of air coming out of a tire pump when being detached. Also, a little water could come out also. Both are normal. If the valve has not been tested for a number of years, it may stick at first too.

Nevertheless, if the handle does not snap back, or if it continues to leak a little water, that is not regular. If it still leakages some, raise the handle a couple of more times to see if it will re-seat itself. You might wish to wait a day or so it see if it re-seats itself before presuming it has to be replaced.

Hot Water Heater Repair Fort Lauderdale would like to handle any T&P valve replacements for you, so though water heaters are usually fairly upkeep free, there are some safety preventative measures one should bear in mind. With that in mind here is a summary of a pressure relief valve replacement.

1. The gas to the water heater has to be turned off, or the breaker for an electrical water heater.
2. The cold water cut-off valve needs to be closed .
3. The valve below the T&P valve has to be opened to drain a little water in order to relieve some of the pressure in the storage tank.
4. The overflow pipe of the T&P valve needs to be taken off. It might need to be cut off if it is soldered or securely glued.
5. The pressure relief valve needs to be unscrewed with a pipe wrench.
6. Wrap the new T&P valve with Teflon tape and screw it in place. Make sure the overflow pipe opening is positioned away from the storage tank.
7. Reattach the drain pipe, likewise making use of new Teflon tape.
8. Turn the water back on, and analyze your work for any leaks.

The following video offers a summary of this procedure:


Preventative Water Heater Maintenance in 10 Minutes

Posted by on Sep 24, 2014 in Water Heater Repair Fort Lauderdale | 0 comments

Water heater maintenance in 10 minutes? Yes, that’s correct. Water Heater Repair Fort Lauderdale is going to show one how to perform some water heater preventative maintenance. And, that’s the time it will take to complete these two important water heater maintenance tasks; nevertheless, we understand that these will do an exceptional task of assisting with three things:

  • Having the water heater last much longer for it will save on money with operating it.
  • Ensuring ones water heater runs safely is important for we do not desire it to explode in in ones house.
  • And having it run more energy efficiently likewise helps one save one some money.

We are now ready to spend ten minutes once or two times a year to help save some money on energy bills.

Testing the T&P Relief Valve
The T&P Valve, also referred to as the temperature and pressure relief valve, has a vital job. It’s role is to assist to see to it excess pressure inside the water storage tank does not develop, or in even more basic terms, it makes certain that a water heater does not explode. The T&P valve has a lever or little handle. All one has to do is lift it part way then let go of it back. It is supposed to snap back to its closed position quickly. hopefully, a little water is heard going into the drain pipe below the lever that was just raised and perhaps heard some pressure being released also. If none of these things have happened during the test, the valve will have to be changed.

Carry out a Mini Water Heater Tank Flush
Naturally, rust and rust will take place inside the water storage tank due to the chemical reactions taking place with all the elements inside that are needed to heat water. We will not get overly technical right here, however it is simple to assist prevent this process by doing a flush or draining of all or a portion of the water in the tank.

For just a mini flush, position a container under the drain valve below the tank. Open the drain valve and fill the container with water. Drain a minimum of a few gallons of water in all. Let the water sit in the pail for a couple of minutes to settle and analyze if there is much that settles to the bottom of the container. If there is, if the water heater has not been drained for a long period of time (or ever), it would be best to do a complete flush of the tank to get as much of the sediment out as possible. You will want to turn the temperature dial down and may want to let the water cool down for about an hour initially so it is not too hot while draining it. Likewise, it would be easier to attach a hose to the drain valve and let the water go outside rather of utilizing buckets.

If the water looks fairly clean and clear from the tiny test you should be all set. When the water heater has a large amount of sediment inside of it, it can make loud popping noises and it cuts down on its effectiveness too.

Though water heaters are relatively maintenance free and simple to run, at any time one feels the slightest uncomfortable or are unsure of what to do, it is always best to have give Water Heater Repair Fort Lauderdale FL a call to assist with ones regular water heater maintenance.

Here is an infographic that illustrates these steps, and check out our blog more water heater tips and advice.

Water Heater Repair Fort Lauderdale

Fort Lauderdale Water Heater Safety Precautions

Posted by on Sep 22, 2014 in Plumbing Repair Fort Lauderdale, Water Heater Repair Fort Lauderdale | 0 comments

Correctly preserving ones water heater is important not so it works to its full capacity and can conserve some energy cash, but for safety issues too. Yes, it can blow up – it doesn’t take place too typically for property owners, but clearly this is something that Water Heater Repair Fort Lauderdale does not want to have occur to you!

Vents
Venting can be sort of technical however we will go over the essentials below. The vent should be the exact same diameter as the draft diverter of the water heater tank. It is expected to go up and out (for atmospherically vented heaters). Not other directs like up, down, up and out. For direct-vent water heaters, the vent need to head out a side wall. When it comes to power-vent heaters, the fan blows the fumes out, so there is some flexibility in the direction they are vented.

Any roofing system or wall that the vent goes through need to be a double wall. The single wall pass throughs ought to be screwed with 3 screws per area. If these essentials are not adhered to, the vents can break down in time and carbon monoxide gas can cause significant issues within ones house. Obviously we do not want that to happen!

The only other concern with venting is that of backdrafting. The fumes can eat the vents with acid condensation. If enough of this gets on cold piping and the water heater it will not be a great scenario for an effectively working water heater. If the fumes return inside the rather of being correctly vented outside, the fumes can enter the living locations of the home. Soot troubles can develop too.

Dielectric Connectors
The steel water heater is connected to cooper pipes by the dielectric connectors. When two these 2 metals are put together in water electrolysis takes place. The process wears away one metal away to secure the other. This process is crucial in protecting the inside of the water heater. Inspection for leakages should be done where the connections are made.

Temperature and Pressure Relief Valve
This is kinda of an essential part of the water heater, for it helps make certain the darn thing does not explode under pressure if the temperature exceeds the appropriate limitations the water heater is made for. Once a year (a minimum of) the T&P valve should be examined to see to it, it is working effectively, for they can be prone to failure. Merely lifting up on the handle water ought to flow easily out and stop when the handle is let go of. If it simply runs or trickles, or does nothing at all, it will should be replaced.

The drain lines for the T&P line should not be routed up, because water doesn’t flow uphill too well. Ensure it goes down and or out please. If water is running out the drain line frequently, it is the sign of something incorrect too. It can be one of numerous various things that we will not go into right here – simply speak to a regional plumbing professional please.

Earthquake Straps
Yep, even if you don’t live in an earthquake area and are needed to have these on ones water heater, it is a pretty good concept to do so. It appears like most all brand-new homes in sub-divisions these days have the water heater in the garage. Yes, there is usually a concrete curb in front of it so one does not drive a car into it, however things can inadvertently knock it over so be safe and strap that say thanks to in.

Temperature Level Setting
It seems most domestic water heater tanks have settings of warm – hot – very hot … and not degree settings. Some “tips” on saving energy in the house especially in the winter time, say to decrease the setting on the tank to 120 degrees. That’s significant for saving energy however legionella bacteria, which triggers Legionnaire’s disease can grow at 120 degrees. By inhaling the mist from the water in the shower, one can inhale the bacteria. Try to discover a medium between 130 and 120 degrees. Above 130 degrees is technically a scalding temperature so beware.

Anode Rods
These typically are made from aluminum and there is nothing wrong with that in concept, though we suggest utilizing magnesium ones. Let’s state for whatever reason there is some kind of emergency or catastrophe where one lives and one had to utilize the water in the water heater for drinking water (since great deals of emergency readiness people suggest doing this). The water that comes out of the drain valve is the water at the bottom of the tank. If one has aluminum anodes, that water will be packed with aluminum substances, which is bad for the body. It is bad for the stomach, intestinal tract and joints.

The anodes assist with rust protection and are vital in lengthening the life of the water heater. They can likewise aid with odor issues with the water. Generally, magnesium anodes simply work much better for lots of various reasons like the health perks, let develop of sediment, a quieter water heater, and they have the tendency to work more competent with softened water.

Drain Valve
Ok, simply check it at least yearly to make sure the darn thing opens and works. And it is good to drain and flush the tank a minimum of once a year anyhow (something you of course are doing already). If for some reason one needs to make use of the water throughout a disaster or drain it to rather a noisy tank and have actually not drained it regularly, and it does not open, it will take longer to remedy the issue you are initially trying to repair.

Combustion Changer Hatch
Since gas and oil water heaters breathe the air drawn in from below, combust with it and exhale it, it is essential to keep the location around it, specifically below the water heater, clean and swept. If if is not burning correctly, it can trigger composing concerns (pointed out above), along with combustion and fume problems and possibly be a fire threat. Some of analyzing the chamber and exactly how the flame burns is objective so we are not going to enter into a great deal of information right here. it is very important to see if the combustion chamber roof has a lot of rust or water markings or is black in color. These are not a good sign at all. One should see some blue flame at the bottom when it burns and orange and yellow at the top, nevertheless, the yellow ought to not be super high up. One ought to see gray metal, some white condensation marks are ok.

Here is an infographic to highlight the information above:

Water Heater Repair Fort Lauderdale

What is the Perfect Fort Lauderdale Water Heater Temperature

Posted by on May 15, 2014 in Water Heater Repair Fort Lauderdale | 0 comments

There are different views on exactly what is the very best temperature at which to set ones water heater. Water Heater Repair Fort Lauderdale will be sharing some of the various views with specific evidence from those sources in order for one to make his/her own choice on the topic.

First of all, the default setting most water heater producers have their products set at is 140 degrees. If you have actually never inspected this already on your Fort Lauderdale Water Heater, that could be the temperature it is set. Likewise, it can be challenging to understand for sure exactly what the temperature setting is since numerous times the temperature level dial does not have degrees printed on it, simply warm, hot, really hot … something to that end. Some people feel they are pre-set at a high temperature so it feels excellent to have a lot of hot water – type of like attempting to create excellent brand name awareness in customers.

In regards to energy savings, by turning a water heater down from 140 to 120 degrees, it will conserve between 6 to 10 percent of total energy used. That equates to between $6 to $20 a year in a lot of cases.

Let’s begin off with the most likely the most renowned source, the U.S. Department of Energy. They recommend a setting of 120 degrees. The link to their website above gives a great deal of excellent details on the best ways to decrease ones hot water consumption and costs. It is certainly worth a read.

Now for the health risks of too low of a temperature level setting. It can be shown that Legionella bacteria has the optimum development range between 68 to 122 degrees. It is thought that 25 percent of all water heaters have differing levels of Legionella bacteria contamination.

Legionella bacteria triggers a kind of pneumonia and is passed to humans when one breathes in water contaminated with the bacteria – generally in showers, whirlpool baths or even air conditioning systems. Drinking the water is usually ok. It is a problem with having the bacteria get in ones lungs.

The Centers for Disease Control and Prevention approximates 8,000 to 18,000 Americans contract the disease yearly. 5 to 30 percent of the cases are fatal.

According to OSHA, “At low levels of contamination, the chance of getting Legionnaires’ disease from a water source is very slight. The problem arises when high concentrations of the organism grow in water systems. Water heaters, cooling towers, and warm, stagnant water can provide ideal conditions for the growth of the organism.”  (read more)

Cases to not have the water heater temperature set at 140 degrees would be if there are children in the residence or possibly with elderly individuals too. The risk of being burnt if the faucet was completely on hot water can be too great. Certainly, anyone living in the home that is at risk of contracting Legionella Disease should have it set at 140.

Summary

So decide if there are any issues of individuals burning themselves if the water temperature level is too high. Also, be mindful of any individual who has concerns of contracting Legionella Disease. Because the yearly cost savings of turning the temperature level down is only about $20 many the time with the typical house’s hot water use, it might be a great choice to keep the temperature above 120 degrees just for the health related advantages; nevertheless, Hot Water Heater Repair in Fort Lauderdale FL will let you make the call.

Water Heater Repair Fort Lauderdale

Explore more visuals like this one on the web’s largest information design community – Visually.

Enhanced by Zemanta

Fort Lauderdale Water Heater Safety

Posted by on May 9, 2014 in Water Heater Repair Fort Lauderdale | 0 comments

Water heaters are rather basic on the face of it, and they’ve changed little in the past 50 years suggests Water Heater Repair Fort Lauderdale. Thanks to some essential refinements, they are certainly much better than they used to be, with longer life spans, greater efficiency, and more security features that decrease the threat of injury and property damage.

All water heaters convert energy to heat, and then transfer that heat to water. They are connected to a cold water supply pipe and have at least one pipe for outgoing hot water that directs the heated water to taps and home appliances throughout the house.

Though there is a range of water heaters on the market, including electric, propane, tankless versions, as well as solar-powered models, the most usual in the United States is a holding tank fed by natural gas.

These include a steel tank with a heating element at the bottom and a flue running down the center of the tank to vent the carbon monoxide that is a by-product of burning natural gas.

You’ll also see some sort of thermostat control on the body of the tank that allows one to shut off the gas and regulate the pilot light. These thermostats use a temperature-sensing probe that automatically shuts down the gas if it detects that the pilot light goes out or fails to light.

The interior of the tank is bonded with vitreous glass to safeguard it from rusting. Despite this protective sheath, there is still some small amount of steel exposed, triggered by constraints in the covering process. That exposed steel is vulnerable to rust. To protect the steel from rusting, the makers set up sacrificial anode rods in the tanks, usually made from magnesium or aluminum. With the procedure of electrolysis, the anode rod corrodes, instead of the tank. The tank will rust if the anode rod is totally consumed, unless one replaces it. This is the most usual reason for problems with water heaters.

Preventive Maintenance and Fort Lauderdale Water Heater SafetyWater Heater Repair Fort Lauderdale

For the functions of this information, we’re willing to assume that water heater was correctly set up, and that it passed the home evaluation.

Here are some of the fundamental steps to keeping a water heater in proper shape.

Initially, eyeball it. Water heaters have a great deal of rust security within, however hardly any on the outside, so look out for leakages. Likewise inspect for staining, flaking paint, or rust on the surface of the tank. External rust can cause your tank to fail just as surely as internal rust. Remember that the outside shell may look fine on the outside, while consumed with rust on the inside. However, if nothing looks out of the ordinary, move on to routine upkeep responsibilities.

The two main steps to keeping a water heater are occasionally draining the tank to get rid of sediment, and testing the temperature level and pressure release valve (T&P valve) to make sure that it is working effectively.

When a water heater operates, sediment develops. That sediment is in fact calcium carbonate, a mineral present in the water, which is precipitated out by heating. It settles to the bottom of the storage tank, and can shorten the life of a water heater; minimize its efficiency; block valves, lines and the recirculating pump; and even offer a sanctuary for anaerobic bacteria. How typically one drains the tank depends a lot on the water quality where one lives. Locations that have very hard water need more frequent draining to keep sediment levels low. Usually, the frequency is anywhere from 6 months to 1 year.

The T&P valve is important for preventing explosions due to over-pressure, as it immediately releases water at certain vital pressure levels and avoids the tank from blowing up. Test this valve periodically to guarantee that it opens and closes effectively, so it won’t fail when you need it most.

KEEP IN MIND: If you have actually never ever carried out these tasks in the past, it’s a good idea to hire a technician to do it for you the very first time, and inquire to reveal you ways to do it yourself. While it’s not exceedingly complicated, there are possible hazards involved. The risks of doing it incorrectly are large in contrast to a very little service charge.

Finally, install a carbon monoxide gas alarm near to your water heater. Carbon monoxide is odor-free and colorless, but if your water heater does not vent properly or begins to back draft, those deadly fumes can enter the residence and jeopardize the household.

If everything is working correctly, check the water temperature with a cooking thermometer to see to it it’s set to your households’ comfort level and to guarantee security. If the water is too hot, it can scald or cause injury. Alternatively, some individuals set their water temperature level low to try to be economical. If the water isn’t hot enough, it can harbor bacteria. A great intermediate setting for your water is above 120 degrees.

Learn more tips on our other blog articles too!

How to Diagnose a Leaking Fort Lauderdale Water Heater

Posted by on Apr 11, 2014 in Gas Water Heater Repair Fort Lauderdale, Water Heater Repair Fort Lauderdale | 0 comments

Definitely not something that one wishes to neglect or postpone, is a leaking water heater. Even if it just seems a little leak, let’s take care of the problem in a prompt manner. A lot of times Water Heater Repair Fort Lauderdale has actually seen a minor leakage suggests a bigger problem at hand, or almost to be at hand.Water Heater Repair Fort Lauderdale

Aside from the possible trouble the water heater itself may be having, one will wish to ensure the water leaking does not damage the floor or walls in the area of the leak (not knowing where ones water heater is located). If that little leakage becomes a major leak, the water damage can be expensive.

Also, there are health interested in mold and mildew if the damp areas remain moist for a long period of time. Some mold spores can be hazardous and trigger health worries the EPA warns.

And, we have yet to see a water heater leak go away or fix itself.

Let’s Figure Out From Where the Leak is Coming
Condensation can form in overly damp weather condition, so a small quantity of water under or by the tank might not be a leak. Other devices or a furnace drain line might be the offender even. Do a great investigation to be sure.

Take an appearance at the plumbing fittings and the top, sides and bottom of the water heater next. If they appear to be dry, that is an excellent indicator and once more, may be originating from something else in the space. Not to be excessively obvious, but look up directly above the water on the floor and see if an overhead pipe or something else could be the cause.

Here’s a great test to do next if all looks alright. Dry the puddle of water. Put some dry paper towels down on top of where the puddle was and examine them periodically. If they stay dry all is well. If not and there is nothing else in the location to cause the water, then it appears like it is the water heater.

When it is understand that the heater is leaking, the initially thing to do is turn off the power. For electric heaters turn it off at the circuit breaker. For gas heaters, set the dial to off. If the leak is considerable, clearly turn the water system off too.

Even if one is not feeling excessively comfortable repairing the leakage oneself, by assisting locate the source of the leak will initially assist the water heater repair business that will help.

4 Locations to Check for Leaks on the Water Heater

1. First check all-time low of the tank. There is a layer of insulation and the tank really has two layers to it. An internal leak will usually appear from all-time low of the tank. If the water heater is getting older, the inside will eventually rust and wear away and will have to be replaced.

2. The temperature and pressure relief valve, or called the T&P valve. It can be found on the side of the tank and has a pipe linked to it that diminishes the side of the tank to the ground. It’s purpose is the launch extra pressure in the water tank. If it is leaking, water may leak out of it by the manage or around where it connected to the tank. Water might be running down the pipe it is connected to. One can repair these leaks for the valves can put on out. Nonetheless, it is excellent to be knowledgeable about this for the purpose of the valve is to see to it the tank does not explode … so it’s type of essential to say the least.

One must at least once a year raise the pressure relief valve to see to it some water will come out and stop once more once the valve is released. If water still streams or for some reason the valve will not open, it requires replaced.

3. Next check the drain valve. It is simple enough to do. It is found on the side to all-time low of the tank. It should be closed all the method, obviously. This is a simple fix if it is leaking. Often times these are made of plastic and can use out. Similar to checking the pressure relief valve yearly, this should be opened and near to see to it it doesn’t close up from lake of use.

4. Finally, check the tightness of the cold and hot water connections to the water heater, located at the top. They might simply have to be tightened up. If after tightening them they still show they are leaking, replacing the connections typically will do the technique.

In future articles Water Heater Repair Fort Lauderdale will go into detail on ways to manage some of these repairs oneself. Let us know if you do not feel comfortable dealing with any of this yourself.

Enhanced by Zemanta

Fort Lauderdale Tankless Water Heater Basics

Posted by on Mar 31, 2014 in Tankless Water Heater Repair Fort Lauderdale | 0 comments

Tankless Water Heater Overview Tankless Water Heater Repair Fort Lauderdale FL

Tankless water heaters hаvе growing in popularity fоr a whilе now. Thеѕе compact units mount оn a wall еithеr inside оr еvеn оutѕidе thе house аnd supply hot water оn demand literally withоut end! Thе Europeans hаvе bееn heating water with tankless heaters fоr years. Mаnу people bеliеvе thаt within thе nеxt 5 tо 10 years 50% оr mоrе оf аll American homes will hаvе a tankless water heater in them! Evеn thе big tank water heater companies hаvе triеd tо jump оn board bу partnering with larger Japanese companies tо hаvе units private labeled fоr them.

Tankless water heaters аrе аvаilаblе in electric, nаturаl gas аnd propane fired models. Thе electric tankless water heaters hаvе advantages оvеr tank type electric models but vеrу fеw рrоvidе еnоugh capacity tо serve multiple fixtures with оnlу оnе unit аnd mау require a larger electrical service tо operate them. Thiѕ hаѕ kерt mоѕt builders frоm uѕing thеm in nеw construction. Althоugh thеу dо tеnd work wеll in small home, condo оr apartment applications whеrе gas iѕ nоt аn option. Fоr thе purpose оf thiѕ tutorial wе аrе gоing tо talk аbоut thе gas fired units. Watch fоr a future article соntаining information оn electric tankless heaters.

Tankless water heaters work оn demand bу uѕing sensors аnd computer boards tо monitor thе flow оf water аnd сhаngе thе rate оf firing tо supply juѕt thе amount оf hot water required fоr thе сurrеnt demand. Alѕо called оn demand heaters, meaning thаt thеу burn lеѕѕ gas tо supply hot water tо ѕоmеthing likе a sink thаn thеу wоuld if уоu аrе uѕing multiple fixtures аt thе ѕаmе time. Thiѕ modulating firing rate аlѕо makes thеm vеrу efficient tо operate аѕ уоu аrе оnlу uѕing thе еxасt amount оf fuel needed аt thаt time.

A term thаt ѕhоuld bе avoided iѕ “instantaneous”. Tankless water heaters аrе nоt instantaneous. It dоеѕ tаkе thеm аbоut 2 seconds tо gо frоm thеir аt rest “off” mode tо producing hot water аt thе ѕеt point temperature. Thiѕ iѕ nоt a big issue however. Thе problem iѕ if a consumer thinks bу hearing thе term “instantaneous” thаt thеу will gеt water аt еvеrу outlet in thе house instantly if thеу gеt a tankless heater, thеу will bе disappointed. Mоѕt homes hаvе mаnу feet оf piping bеtwееn thе water heater аnd thе outlets аnd dо nоt hаvе a recirculating system. Thе amount оf timе it takes frоm whеn a faucet оr оthеr hot water fixture opens tо whеn thе ѕеt point water gеtѕ tо thаt point iѕ called “Lag Time”. In today’s large homes with lоw flow fixtures it iѕ nоt uncommon tо ѕее a lag timе оf оvеr 3 minutes tо gеt hot water tо remote fixtures in a home. Changing thе type оf water heater will nоt improve thе speed оf thе delivery оf water unlеѕѕ thе location оf thе heater iѕ altered оr if a recirculating system iѕ installed. Bесаuѕе оf thеir small size оf course, mаnу timеѕ whеn a tankless heater replaces a tank, it саn bе moved tо a mоrе central location оr nearer tо thе fixtures it iѕ tо serve. Thiѕ mау cut dоwn оn thе lag timе considerably.

Tankless Water heaters save space in a home bесаuѕе thеу tаkе uр NO floor space. Thеу аlѕо dо nоt require protection frоm vehicles if installed in a garage аnd аrе ѕо small thеу саn bе installed in a crawl space оr attic аѕ well. If уоu rеаllу nееd space, mаnу саn bе installed outdoors giving уоu аll оf уоur interior space back. Juѕt bе ѕurе tо choose a model designed fоr outdoor installation аnd with freeze protection fоr уоur area.

Energy Saving Features оf Tankless Water Heaters

Tankless water heater save on fuel bесаuѕе thеу dо nоt hаvе tо maintain a supply оf hot water in a tank аnd аrе typically “always off”. Tank type heaters fire оn аnd оff аll thе timе tо maintain thе temperature оf water in thе tank within аbоut 10 degrees оf thе thermostat setting (called “Stand-by heat loss”). Thiѕ аlѕо саn result in ѕоmе noticeable temperature difference. Tankless water heaters рrоvidе hot water tо thе ѕеt point temperature рluѕ оr minus 2 degrees.

Anоthеr thing thаt makes a tankless hot water heater mоrе fuel-efficient iѕ thаt thеу аrе “fully modulating”. In оthеr words thеу оnlу uѕе thе fuel needed tо heat thе water tо thе ѕеt point аt thе сurrеnt flow rate. If уоu аrе washing уоur hands uѕing undеr 1 gallon реr minute (GPM) уоu will bе аt a lower firing rate thаn уоu wоuld bе if уоu аrе filling уоur tub аt 3 GPM. Thiѕ works muсh likе уоur car. Whеn уоu аrе sitting ѕtill thе car iѕ idling. Whеn уоu wаnt tо gо оr gо faster, уоu givе it mоrе gas аnd whеn уоu gеt whеrе уоu аrе gоing уоu turn it off. With thеir “always off” condition аnd thеir modulating capabilities it iѕ common tо ѕее uр tо a 50% reduction in fuel uѕе whеn changing frоm a tank type heater tо a tankless unit.

If уоu аrе gоing tо сhаngе frоm a 50-gallon gas heater tо a tankless уоu аrе рrоbаblу nоt gоing tо realize ԛuitе thаt muсh energy savings. In fact a 50-gallon tank water heater dоеѕ nоt uѕе muсh mоrе fuel аt аll compared tо mоѕt tankless heaters. Hоwеvеr a 50-gallon tank heater оnlу саn rеаllу givе уоu аbоut 40 gallons оf hot water реr uѕе bеfоrе уоu begin running оut оf hot water. Thе tankless heater will deliver mоrе thаn 300 gallons реr hour fоr mоѕt оf thе year аnd уоu саn nеvеr run out! If it iѕ аn electric tank water thаt уоu аrе replacing, уоur savings mау bе higher thаn 50% depending оn thе size оf thе tank. If уоu rеаllу wаnt tо knоw whаt уоur savings mау be, lооk fоr thе yellow “Energy Guide” sticker оn уоur existing heater аnd lооk fоr thе оnе оn thе tankless unit уоu аrе considering. Thiѕ will givе уоu a good idea оf whаt tо expect. Of соurѕе уоur personal uѕе will effect thiѕ аѕ well. If уоu hаvе a family оf 6 thаt hаѕ nеvеr hаd еnоugh hot water with a 50 gallon tank heater, уоur bill might juѕt gо uр bесаuѕе nоw уоur family will nоt bе taking cold showers оr hаvе tо shorten them. If уоu hаvе a vacation home thаt iѕ occupied оnlу оn weekends оr uѕing thе tankless fоr ѕоmеthing likе a school locker room, уоur savings will bе greater bесаuѕе thе tankless unit iѕ “always off” eliminating a lot mоrе stand-by heat losses.

Pаrt оf thе decision making process is; Whаt dо уоu want? Endless hot water mау bе worth thе additional investment tо уоu еvеn withоut аn energy payback.

Here are some excellent FAQ’s from the Howell-Oregon Electric Cooperative website.

Locations fоr a Fort Lauderdale Tankless Water Heater

Builders likе thе tankless water heaters fоr ѕеvеrаl reasons, nоt thе lеаѕt оf whiсh iѕ space savings. Whеn уоu charge bу thе square foot fоr a home, saving space means thаt home iѕ worth more. A tank type heater installed in garage requires a floor stand, a pipe tо protect аgаinѕt vehicle impact аnd nоrmаllу venting аll thе wау tо thе roof. In a two-story home, thiѕ means mоrе framing, drywall аnd paint tо enclose it. A tankless water heater iѕ wall mounted аnd саn bе sidewall vented, keeping thе cost оf venting tо a minimum. It аlѕо dоеѕ nоt tаkе uр аnу оf thе garage floor space. Bеing аblе tо install tankless heaters оutѕidе оr build thеm intо a wall givеѕ еvеn mоrе options thаt thе builder nеvеr hаd before. Thiѕ means еvеn lеѕѕ venting cost (practically none) аnd еvеn mоrе space savings. Sоmе builders will locate thеm centrally in a crawl space tо cut dоwn оn lag time. Othеrѕ will locate thеm nеаr a master bath оr kitchen. Sоmе will install thеm in attics оr оutѕidе tо free uр mоrе space. Sinсе thеrе iѕ nо tank tо burst, installing a tankless heater in аn attic iѕ nоt аѕ risky аѕ installing a tank there. Evеn with a drain pan, a tank water heater in аn attic iѕ a catastrophe waiting tо happen! A drain pan thаt iѕ 3″ deep will nоt dо muсh good if thе bottom blows оut оf a 50-gallon оr larger tank water heater.

On a large home, ѕоmе builders will hаvе twо tankless water heaters systems. Onе will serve оnе раrt оf thе home аnd thе оthеr will serve thе rest. Thiѕ wау thе heaters саn bе located closer tо thе points оf uѕе аnd cut dоwn оn lag timе withоut installing a recirculating system.

Outdoor Installation оf a Tankless Water Heaters

Mаnу оf thе bеttеr tankless companies hаvе models thаt саn bе installed outdoors. Thiѕ frees uр аll оf thе interior space аnd dоеѕ аwау with venting costs оr combustion air issues. Thеѕе units will hаvе thеir оwn freeze prevention systems hоwеvеr уоu will nееd tо protect уоur water piping frоm freezing. Thiѕ саn bе dоnе with a pipe cover kit оr recessed wall box, whiсh саn bе insulated. It iѕ аlѕо recommended thаt уоu install self-regulating heating cable оn thе piping tо kеер it аbоvе freezing. Outdoor units require power аt аll timеѕ tо operate thеir freeze prevention system. In thе event оf a power outage in freezing weather, уоu will nееd tо prevent уоu tankless frоm freezing bу leaving a faucet dripping оr draining thе unit until thе power соmеѕ back on. A “back-up” power supply оr generator iѕ аlѕо аn option.

Check out our page for Tankless Water Heater Repair Fort Lauderdale too!

How to Turn Off a Water Heater in an Emergency

Posted by on Mar 31, 2014 in Water Heater Repair Fort Lauderdale | 0 comments

No one wishes to consider this, however it is essential to comprehend the actions associated with closing down ones water heater in case it is required in an emergency scenario.

Emergency Fort Lauderdale Water Heater Shut Off Procedure

1. Shut Off The Gas or ElectricityWater Heater Repair Fort Lauderdale

Gas – Twist the dial on the top of the thermostat from the “on” to the “off” position. This will switch off the gas at the water heater. If you ever smell gas– exit the house and contact the gas company instantly.

Electricity – Find your breaker box and flip the breaker for your water heater or if your water heater has a disconnect switch near the water heater simply switch off the switch to switch off power to the water heater.

2. Shut Off The Water Supply
Discover the cold side water pipe link to the water heater and follow it back to the source or the wall. If you have an old style turn faucet handle – Twist the handle clockwise until it stops. This ought to turn of the water.
If you have a more recent lever style ball valve pull or push the the handle a quarter turn– this ought to switch off the water.

Water Heater Drain.

3. Drain The Water Heater

Drain the water heater if necessary to avoid any damage by linking a garden hose to the bottom drain valve on the water heater. Run the other end of the hose to a lower place where hot or rusty water will not cause damage (hot water can harm grass and plants). Open the hot side faucet in the sink closest to the water heater– this will launch the vacuum seal and let the water drain out of the water heater. Permit 10-30 minutes for the water heater to drain.

Check out more articles from Water Heater Repair Fort Lauderdale

Emergency Water Heater Repair in Fort Lauderdale

Posted by on Mar 31, 2014 in Water Heater Repair Fort Lauderdale | 0 comments

Does Your Water Heater Need a Repair Immediately?

Emergency plumbing and water heater repairs are typically needed at the most inopportune times we understand at Water Heater Repair Fort Lauderdale. Often there are not any signs that they are going to be in ones future either.

Periodically, ones water heater is not supplying as much hot water as is needed for the house. We can rapidly figure out the cause and let you get on with your typical everyday routine. Our Fort Lauderdale next-door neighbors have relied on us for a long time for their water heater repair needs. We also like to share as much advice as we can in regards to how to perform regular maintenance on ones own water heater to help keep working at peak performance. We routinely publish details on our blog right here.

If you are considering remodeling or adding an addition or brand-new home we would love to be of help also. Our water heater replacement services are outstanding along with our capability to assist plan the installment of new water heater and plumbing systems in a new house or business.

Please call us with any concerns. Enjoy our company overview video below too!