Tankless Water Heater Repair Fort Lauderdale

Fort Lauderdale Tankless Water Heater Troubleshooting

Usually, most of the problems that might happen with a tankless water heater, triggering it to need a repair are external factors. Right here are some of them:Tankless Water Heater Repair Fort Lauderdale

  • The venting is not appropriate. The most common mistake is the use of typical B-vent, which can quickly damage the heat exchanger due to acidic condensation.
  • Examine the gas supply line. Occasionally the supply line is undersized and was just attached to the existing line size. The size specified in the installation handbook has to be used.
  • The gas pressure is not proper. The working pressure needs to be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, relying on the design.
  • The wrong kind of gas that is being used – natural gas or liquid propane. It is not possible to use the non-specified type.
  • Water flow or temperature level variation issues. There are a number of things we will inspect to ensure they are working effectively, like cleaning or changing the input filter, examining the check valve, inspecting the seals in the faucets and looking to see if there is a cross flow somewhere that must be fixed.
  • Hard Water Problems: In locations where the water is really hard, de-scaling will be needed occasionally.
  • Environmental issues. The heaters need to be installed in a clean area with access to combustion air that is devoid of dust, lint, grease, or chemicals.

Back to Water Heater Repair Fort Lauderdale